Eizo FlexScan S1910 User Manual download pdf (Page 5)

English

TroubleshootingSetting/AdjustmentPrior to use Installation

Connecting Cables

Attention

• When replacing the current monitor with an S1910 monitor, be sure to change the PC settings for

resolution and vertical frequency to those which are available for the S1910 monitor referring to the

resolution table (back of cover page) before connecting the PC.

NOTE

• When connecting two PCs to the monitor, refer to the User’s Manual on the CD-ROM.

Check that the monitor and the PC are powered off.

Connect the monitor to the PC with a signal cable that matches the connectors.

After connecting the cable connectors, tighten the screws of the connectors to secure the coupling.

Plug the power cord into a power outlet and the Power connector on the monitor.

Adjusting Screen Height and Angle

Adjust the screen height, tilt and swivel the screen to the best condition for working.

Connectors on the

DVI-I connector

D-sub mini 15-pin

connector

D-sub 15-pin

connector

Connectors on the

monitor

DVI-D connector

D-sub mini 15-pin

connector

Signal cable FD-C39 (supplied)

Signal cable MD-C87 (supplied)

Macintosh Adapter (optional) and

signal cable MD-C87 (supplied)

Digital connection

Analog connection

1 2 3 4 5 6 7 8 9 10 ... 57 58

No comments

Eizo FlexScan S1910 User Manual Page 5