Eizo CG210 User Manual download pdf (Page 2)

Remote Director™ SWOP Application Data Sheet

IV. CONTROL GUIDE

SWOP specifies that a control guide such as the GATF/SWOP Proofing Bar be supplied

on every off-press proof. As a minimum, this guide should contain solids of the primary

process colors and two-color overprints, as well as a 25%, 50% and 75% tints in 133-line

screen ruling of each of the process colors. Additional areas such as 1%, 2%, 3%, 5%

and 95%, 97%, 98%, 99% may be particularly useful in digital proofing.

A gray balance bar must be included on the proof, designed to match the neutral

appearance and weight of black tints of three different values, under standard viewing

conditions.

Any proofing bar that contains the above values can be used. A SWOP Digital Color Bar

satisfying these criteria is a part of the Remote Director application.

V. SYSTEM COMPONENTS

CPU:

Apple Power Mac G4 with 500 MB SDRAM, or better; 20 GB of available hard disk

space

Intel® Pentium III or 4 processor with 500 MB or RAM and 20 GB of available hard

disk space; or better

Monitor:

EIZO ColorEdge CG210 (hereafter “EIZO CG210”)

Monitor Calibration Instruments:

GretagMacbeth Eye-One Monitor, Eye-One Photo or Eye-One Pro (without UV filter.)

Monaco OPTIX XR by X-Rite, Inc.

Network Connectivity:

Cable/DSL Network access minimum, 1 Mbps Cable or T1 and firewall with access to

port 443 and outbound only on port 7798 recommended

Software:

Mac OS X 10.3.6 or later

Microsoft® Windows® 2000 with SP3 or Windows® XP with SP2 or better

ICS Remote Director 3.0 or later

Viewing booth:

A variable-intensity monitor-side viewing station with D50 reflective lighting.

Best: GTI SOFV-1ex

Good: GTI SOFV-1e or 2e

Acceptable: GTI PDV-3D

1 2 3 4 5 6 7

No comments

Eizo CG210 User Manual Page 2