Eizo FLEXSCAN L365 - User Manual download pdf (Page 27)

English

Arm-stand

5. ATTACHING AN ARM STAND

The LCD monitor can be used with an arm stand by removing the tilt stand and

attaching the arm stand to the LCD monitor.

NOTE

• Use an arm stand that satisfies the followings.

- When using the LCD monitor with an arm stand, the arm stand must be VESA

approved :

* Use an arm stand with a 75 mm x 75 mm hole spacing on the arm mounting

pad.

* Weight: Use an arm stand that is able to support an object weighting 8.0 kg.

- Use an arm stand with sufficient stability (mechanical firmness) to support the

weight of the monitor.

- Use an arm stand remaining that position where it is manually moved.

- Use an arm stand with the ability to tilt the monitor forward and backward.

• Please connect cables after attaching an arm stand.

Setup Procedure

1. Lay the LCD monitor down. Do not scratch the panel.

2. Remove the tilt stand by loosening the screws (2 pcs of M4 x 10

mm).

3. Attach an arm stand to the LCD monitor securely.

4 Mounting Screws (enclosed): M4 x 12 mm

5. ATTACHING AN ARM STAND

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 43 44

No comments

Eizo FLEXSCAN L365 - User Manual Page 27