Eizo FlexScan S1703 User Manual download pdf (Page 15)

Chapter 2 Settings and Adjustments

2-4ScreenAdjustment

DigitalInput

When digital signals are input, images are displayed correctly based on the

preset data of the monitor, but if characters and/or lines appear blurred, go to

step 6 “● To modify blurred characters/lines [Smoothing]” (page 17). When

performing more advanced adjustment, see “2-5 Color Adjustment” (page 18) and

subsequent pages.

AnalogInput

The monitor screen adjustment is used to suppress ickering of the screen or

adjust screen position and screen size correctly according to the PC to be used.

To use the monitor comfortably, adjust the screen when the monitor is set up for

the rst time or when the settings of the PC in use are updated.

The Self Adjust function works when all of the following conditions are

satised.

• When a signal is input into the monitor for the rst time or when the

resolution or Vertical/Horizontal Frequency not displayed before is

set

• When signals with the vertical resolution over 480 are input

If the screen is not displayed correctly even after performing the Self Adjust

operation, adjust the screen according to the procedures on the following pages

to use the monitor comfortably.

[AdjustmentProcedure]

 Performtheautoadjustment.

●Toadjustickering,screenposition,andscreensize

automatically[Screen]

(1) Choose <Screen> from the <Auto Adjustment> menu, and press

The <Screen> menu appears.

(2) Select “Execute” with

or , and press .

Flickering, screen position, and screen size are corrected by the auto-

adjustment function.

If the screen is not displayed correctly even after adjusting in

step 1 above, perform the adjustments according to the

procedures on the following pages. When the screen is

displayed correctly, go to step 5 “● To adjust color gradation

automatically [Range]” (page 17).

 Preparethedisplaypatternfortheanalogdisplayadjustment.

Load the “EIZO LCD Utility Disk” to your PC, and then open the “Screen

adjustment pattern les”.

Attention

• Wait 30 minutes or more from

monitor power on before starting

adjustments. (Allow the monitor

to warm up for at least 30 minutes

before making adjustments.)

•

The self adjustment (or automatic

screen adjustment) function works

correctly when an image is fully

displayed over the Windows or

Macintosh display area. They do not

work properly in the cases below:

- When an image is displayed only

on a part of the screen (command

prompt window, for example)

- When a black background

(wallpaper, etc.) is in use

Also, these functions cannot work

properly in some graphic boards.

NOTE

• For details and instructions on opening

the “Screen adjustment pattern les”,

refer to the “Readme.txt” le.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 53 54

Comments to this Manuals

No comments

Eizo FlexScan S1703 User Manual Page 15

Comments to this Manuals

Related products and manuals for TVs & monitors Eizo FlexScan S1703