Eizo L695 User Manual download pdf (Page 27)

English

4. ADJUSTMENT

4-3. Color Adjustment

The <ColorManagement> menu in the ScreenManager enables to change the color of

the screen. By using the <Color Mode>, the adjustment mode can be selected from

<Custom mode> (to adjust the color settings according to your preference) and <sRGB>

mode.

In the analog input, perform the “Range Adjustment” (p. 24) before making the

color adjustments.

NOTE

• Allow the LCD monitor to stabilize for at least 20 minutes before making image

adjustments. (Allow the monitor to warm up for at least 20 minutes before making

adjustments.)

• Performing the <Reset> of the <ColorManagement> menu returns the color settings

to the default settings. The values shown in percentages represent the current level

within the specific adjustment. They are available only as a reference tool. (To

create a uniform white or black screen, the percentages for each will probably not be

the same.)

<Custom> mode: To adjust the color settings according

to your preference

To set the Brightness of the screen

→ Use the <Brightness> adjustment.

The brightness of the entire screen is controlled by changing the brightness of the

backlight.

Select <Brightness> in the screen menu and adjust by using the right and left

buttons.

NOTE

• Directly pressing the control buttons also adjusts the contrast and brightness.

Press the <Enter> button to save and exit the settings after the adjustment.

To set the Contrast of the screen

→ Use the <Brightness> adjustment.

This controls the brightness for the each color (red, blue and green) at the same

time.

Select <Brightness> in the screen menu and adjust by using the right and left

buttons.

NOTE

• Percentage except 100 % may cause undisplayable color tone.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 51 52

No comments

Eizo L695 User Manual Page 27