Eizo FlexScan S1501 User Manual Page 31

  • Download
  • Add to my manuals
  • Print
  • Page
    / 35
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 30
29
Chapter 5 Reference
5-6 Preset Timing
The following table shows factory preset video timing (for analog signal only).
Mode Dot clock
Frequency
Polarity
Horizontal: kHz
Vertical: Hz
VGA 640×480@60Hz 25.2 MHz
Horizontal 31.47 Negative
Vertical 59.94 Negative
VGA 720×400@70Hz 28.3 MHz
Horizontal 31.47 Negative
Vertical 70.09 Positive
PC-9801 640×400@56Hz 21.1 MHz
Horizontal 24.83 Negative
Vertical 56.42 Negative
PC-9821 640×400@70Hz 25.2 MHz
Horizontal 31.48 Negative
Vertical 70.10 Negative
Macintosh
640×480@67Hz
30.2 MHz
Horizontal 35.00 Negative
Vertical 66.67 Negative
Macintosh
832×624@75Hz
57.3 MHz
Horizontal 49.72 Negative
Vertical 74.55 Negative
VESA 640×480@72Hz 31.5 MHz
Horizontal 37.86 Negative
Vertical 72.81 Negative
VESA 640×480@75Hz 31.5 MHz
Horizontal 37.50 Negative
Vertical 75.00 Negative
VESA 800×600@56Hz 36.0 MHz
Horizontal 35.16 Positive
Vertical 56.25 Positive
VESA 800×600@60Hz 40.0 MHz
Horizontal 37.88 Positive
Vertical 60.32 Positive
VESA 800×600@72Hz 50.0 MHz
Horizontal 48.08 Positive
Vertical 72.19 Positive
VESA 800×600@75Hz 49.5 MHz
Horizontal 46.88 Positive
Vertical 75.00 Positive
VESA 1024×768@60Hz 65.0 MHz
Horizontal 48.36 Negative
Vertical 60.00 Negative
VESA 1024×768@70Hz 75.0 MHz
Horizontal 56.48 Negative
Vertical 70.07 Negative
VESA 1024×768@75Hz 78.8 MHz
Horizontal 60.02 Positive
Vertical 75.03 Positive
Attention
Display position may be deviated
depending on the PC connected,
which may require screen adjustment
using Adjustment menu.
If a signal other than those listed in
the table is input, adjust the screen
using the Adjustment menu. However,
screen display may still be incorrect
even after the adjustment.
When interlace signals are used, the
screen cannot be displayed correctly
even after screen adjustment using the
Adjustment menu.
S1501_UM_EN.indd 29S1501_UM_EN.indd 29 5/28/2007 5:12:47 PM5/28/2007 5:12:47 PM
Page view 30
1 2 ... 26 27 28 29 30 31 32 33 34 35

Comments to this Manuals

No comments