Eizo FlexScan T966 User Manual download pdf (Page 16)

English

16 3. SCREEN ADJUSTMENT

3-3. Color

By using the <Color Mode> in the <Color> menu, the adjustment mode can be selected

from standard mode (to set the color temperature and the color restoration), custom

mode (to adjust each color tone, (Red, Green and Blue) and sRGB mode. These modes

allow you to adjust the color settings according to your preference.

<Standard> mode to set the color temperature and the

color restoration

To set the color temperature

→ Set the <Temperature>.

Temperature can be set from 4,000 K to 10,000 K, in 500 K increments.

(Including the 9,300 K default setting.)

To eliminate disparities in color temperature and brightness due to an

irregular video signal output

→ Execute the <Color Correction>.

Color Correction corrects irregular video signal output levels to eliminate

disparities in color temperature and brightness. Every time the PC (graphics

board) and input signal change, execute color correction.

[Adjustment Procedure]

(1) Open a www browser and the Pattern.html in the EIZO Utility Disk.

Then, maximize the window.

(2) Execute the <Color Correction>. All other adjustments are off during the

correction. (The operation takes about 20 to 30 seconds. Do not change the

“Pattern” during the correction.) When color correction is complete, the result

is displayed.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 38 39

No comments

Eizo FlexScan T966 User Manual Page 16