Eizo FlexScan HD2441W User Manual download pdf (Page 15)

English

 When connecting a PC with USB connection [USB]

Switch the USB setting of the monitor to either “PC 1” or “PC 2”, according to the PC used.

If it is not set properly, the USB devices connected to the monitor may not work or no sound may come

out from the speakers.

Attention

• When switching the USB setting, a message window may appear.

Message:

“If the USB setting is changed, the USB connection to the selected PC will be lost. Do you change the setting?”

When the message is displayed, note the following.

- When connecting a memory device such as a USB memory to the monitor, do not change the

setting. The data may be lost and damaged. Be sure to change the USB setting after removing the

memory device.

- When an application such as a sound playback, etc. works, do not change the setting. The sound

may not output when the setting is returned to the original. Be sure to change the USB setting after

exiting from the application.

1. Touch .

The Setting menu appears.

2. Select the <USB> icon and tap the slide bar.

The <USB> menu appears.

3. Trace the slide bar left and right to select the setting.

4. After the setting is completed, tap the slide bar.

The USB setting is completed.

5. Touch

The Setting menu quits.

 Sound volume is too high/too low [Volume]

Adjust the volume.

1. Tap the slide bar.

The Volume menu appears.

2. Trace the slide bar left and right to adjust the volume.

Tracing the slide bar to the left makes the sound volume

low and right makes it high.

Attention

• Turn off the monitor if you do not use the monitor for a long time. Unplugging the power cord

completely shuts off power supply to the monitor.

USB menu

Volume menu

Prior to use Installation TroubleshootingSetting/Adjustment

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 147 148

No comments

Eizo FlexScan HD2441W User Manual Page 15