Eizo FlexScan T1781 User Manual download pdf (Page 21)

Chapter2AdjustingScreens

2-4. Screen Adjustment

●

Digital Signal Input

When digital signals are input, images are displayed correctly based on the preset data of the monitor, but if

characters and / or lines appear blurred, go to “To modify blurred characters / lines” (page 24).

When performing more advanced adjustment, see “2-3. Adjusting Color” (page 15) and subsequent pages.

●

Analog Signal Input

Attention

• It takes about 30 minutes for the performance of electrical parts to stabilize. Please wait 30 minutes or more after the

monitor power has been turned on, and then adjust the monitor.

• The Self Adjust (automatic screen adjustment) function does not work for the images under the resolution of 800 × 600

(SVGA).

• The self adjustment (or automatic screen adjustment) function works correctly when an image is fully displayed over the

Windows or Macintosh display area. They do not work properly in the cases below:

When an image is displayed only on a part of the screen (command prompt window, for example)

When a black background (wallpaper, etc.) is in use

Also, these functions cannot work properly in some graphic boards.

The monitor screen adjustment is used to suppress ickering of the screen or adjust screen position and screen

size correctly according to the PC to be used.

Note

• The Self Adjust function works when all of the following conditions are satised:

When a signal is input into the monitor for the rst time or when a resolution or vertical / horizontal scan frequency

not used before is set

If the screen is not displayed correctly even after performing the Self Adjust operation, adjust the screen

according to the procedures on the following pages to use the monitor comfortably.

Setting Procedures

Perform the auto adjustment.

●

To adjust ickering, screen position, and screen size automatically

Procedure

1. Choose “Screen” in the Setting menu, and press

2. Choose “Analog Adjustment” in the “Screen” menu, and press

3. Choose “Auto Screen Adjust” in the “Analog Adjustment” menu, and press

4. Select “Yes” with

or , and press .

Flickering, screen position, and screen size are corrected by the auto-adjustment function.

Ifthescreenisnotdisplayedcorrectlyevenafterperformingtheautoadjustment,performadjustments

accordingtothefollowingprocedure.Ifthescreenisdisplayedcorrectly,goto“5.Adjustingcolorgradation.”

(page24).

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 71 72

No comments

Eizo FlexScan T1781 User Manual Page 21