Eizo CE210W User Manual

ImportantPlease read this User’s Manual carefully to familiarize yourself with safe and effective usage procedures. Please retain this manual for fut

101. INTRODUCTIONRear / Side / Bottom (CE210W is given as an example.)(9) Stand (Detachable) The LCD monitor can be used with an optional arm stand by

2. CABLE CONNECTION112. CABLE CONNECTION2-1. Before ConnectingBefore connecting your monitor to the PC, change the display screen settings (Resolution

122. CABLE CONNECTIONDigital InputThe monitor supports the following resolutions only.CE210WResolution Frequency Dot Clock Remarks640×480 60Hz120 MHz

2. CABLE CONNECTION13Analog InputSignal Cable Connector of the PC PCSignal Cable (FD-C16 enclosed) Video Output Connector / D-Sub mini 15 pinInput Co

142. CABLE CONNECTION4 Lead the power cord and signal cable into the cable holder at rear of the monitor.NOTE• The cables are recommended to lead wit

2. CABLE CONNECTION156 Turn on the monitor's Power switch and then turn on the PC's power.The monitor's power indicator will light up

162. CABLE CONNECTION2-3. Connecting Two PCs to the MonitorTwo PCs can be connected to the monitor through the DVI-I and the D-Sub mini 15 pin connect

2. CABLE CONNECTION17Priority setting Performance1 If signals from both inputs are present, the monitor gives preference to Signal 1 in the following

183. ScreenManager 3. ScreenManager3-1. How to use the ScreenManagerScreenManager allows you to adjust screen performance though the main menu and sel

3. ScreenManager 193-2. ScreenManager Adjustments and SettingsThe following table shows all the ScreenManager's adjustment and setting menus. &qu

2SAFETY SYMBOLSSAFETY SYMBOLSThis manual uses the safety symbols below. They denote critical information. Please read them carefully.WARNINGFailure to

203. ScreenManager Tips• When the main menu of ScreenManager is displayed on the screen, the FineContrast Menu cannot be activated.ExitPress the Enter

3. ScreenManager 213-4. Useful FunctionsAdjustment LockUse the "Adjustment Lock" function to prevent any accidental changes.Locked function

223. ScreenManagerPower Indicator SettingLight off the power indicator. This function is available for the multiple panels settings.[Procedure]1. Sele

4. ADJUSTMENT234. ADJUSTMENT4-1. Screen AdjustmentNOTE• Allow the LCD monitor to stabilize for at least 30 minutes before making image adjustments.The

244. ADJUSTMENT3 Adjust by using <Screen> menu in the ScreenManager.(1)Vertical bars appear on the screen Use the <Clock> adjustment. Sel

4. ADJUSTMENT25(4)Screen image is smaller or larger than the actual screen images. Use the <Resolution> adjustment. Adjustment is needed when th

264. ADJUSTMENT4-2. Displaying Lower ResolutionsThe lower resolutions are enlarged to full screen automatically. Using the <Screen Size> functio

4. ADJUSTMENT273 Set the brightness of the black area surrounding the displayed image.Set the <Border Intensity>.In the <Enlarge> mode or

284. ADJUSTMENTAdjustment ContentsMenu Function Descriptions Adjustable rangeBrightness To set the brightness of the screen 0~100%Tips• The values sho

4. ADJUSTMENT294-4. Power-save SetupThe <PowerManager> menu in the ScreenManager enables to set the power-save setup.NOTE• Do your part to conse

PRECAUTIONS3PRECAUTIONSIMPORTANT!• This product has been adjusted specifically for use in the region to which it was originally shipped. If operated ou

305. MAKING USE OF USB (Universal Serial Bus) 5. MAKING USE OF USB (Universal Serial Bus)This monitor provides a hub which supports the USB standard.

5. MAKING USE OF USB (Universal Serial Bus) 313 After setting up, the monitor's USB hub is available for connecting USB compliantperipherals to

326. ATTACHING AN ARM6. ATTACHING AN ARMThe LCD monitor can be used with an arm by removing the tilt stand and attaching the arm stand to the LCD moni

6. ATTACHING AN ARM33CE240W• Hole spacing on the arm mounting: 100 mm x 100 mm (VESA compliant)2001001001001004 Mounting Screws (enclosed): M4 x 12 mm

347. TROUBLESHOOTING7. TROUBLESHOOTINGIf a problem persists even after applying the suggested remedies, contact an EIZO dealer.• No picture problems

7. TROUBLESHOOTING35Problems Points to check with PossibleSolutions6.The characters and images have several vertical bars on their right side. • Adjus

367. TROUBLESHOOTINGProblems Points to check with PossibleSolutions18.The Auto adjustment switch does not operate. • Check that there is nothing left

8. CLEANING 378. CLEANINGPeriodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime.NOTE• Never use thinne

389. SPECIFICATIONS9. SPECIFICATIONSCE210WLCD Panel 53 cm (21.1 inch), TFT color LCD panel with Anti-Glare Hard Coating, Viewing Angle: Horizontal: 17

9. SPECIFICATIONS39CE240WLCD Panel 61 cm (24.1 inch), TFT color LCD panel with Anti-Glare, Viewing Angle: Horizontal: 178°, Vertical: 178° (CR: 10 or

4PRECAUTIONS WARNINGPlace the unit at the strong and stable place.A unit placed on an inadequate surface may fall and result in injury or equipment

409. SPECIFICATIONSDefault settingsBrightness 30%Smoothing 3Temperature 6500KFineContrast ModeCustomPowerManager Analog input : VESA DPMS Digital inp

9. SPECIFICATIONS41Dimensions<CE210W>mm (inch)

429. SPECIFICATIONS<CE240W>566(22.3)372(14.6)294(11.6)5°25°7.3(0.29)357.2(14.1)361.9(14.2)60°60.5(2.38)23.5(0.93)60(2.36)85(3.35)39.7(1.56)530(2

9. SPECIFICATIONS43Pin AssignmentDVI-I Connector1234567891011121314 15161920211718 22 2324C1C2C3C4C5Pin No. Signal Pin No. Signal Pin No. Signal1

4410. GLOSSARY10. GLOSSARYClockWith the analog input signal display, the analog signal is converted to a digital signal by the LCD circuitry. To conve

10. GLOSSARY45sRGB(Standard RGB)"International Standard for Red, Green, and Blue color space" A color space was defined with the aim of the c

4611. APPENDIX/ANHANG/ANNEXE11. APPENDIX/ANHANG/ANNEXEPreset Timing Chart for Analog input Timing-Übersichten für Analog Eingang Synchronisation des S

11. APPENDIX/ANHANG/ANNEXE47CE240WModeDot Clock MHzFrequenciesSync PolarityHorizontal:kHz Vertical:HzVGA 640×[email protected] MHzHorizontal31.47 Negative

48Congratulations!The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and te

49For U.S.A. , Canada, etc. (rated 100-120 Vac) OnlyFCC Declaration of ConformityWe, the Responsible Party EIZO NANAO TECHNOLOGIES INC.5710 Warland Dr

PRECAUTIONS5 WARNINGWhen attaching an arm stand, please refer to the user's manual of the arm stand and install the unit securely.Not doing so ma

50Hinweise zur Auswahl des richtigen Schwenkarms für Ihren MonitorDieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standa

51Recycle AuskunftDie Rücknahme dieses Produktes nach Nutzungsende übernimmt EIZO in Deutschland zusammen mit dem Partner eds-r gmbh rucknahmesysteme.



6PRECAUTIONSLCD PanelIn order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in lower brig

1. INTRODUCTION71. INTRODUCTIONThank you very much for choosing an EIZO Color Monitor.1-1. FeaturesCE210W• 21" wide format LCD• Dual inputs compl

81. INTRODUCTION1-2. Package ContentsPlease contact your local dealer for assistance if any of the listed items are missing or damaged.• LCD Monitor•

1. INTRODUCTION91-3. Controls & ConnectorsFrontSIGNAL AUTO ENTER(1)(4)(2)(6)(7)(3)(8)(5)(1) ScreenManager®Monitor Adjustment menu(2) Monitor Adjus