Eizo CE210W User Manual download pdf (Page 15)

2. CABLE CONNECTION

Turn on the monitor's Power switch and then turn on the PC's power.

The monitor's power indicator will light up (blue).

If an image does not appear, refer to the "

7. TROUBLESHOOTING" for advice.

Whenever ﬁnished, turn off the PC and the monitor.

Tips

•

When turning on the monitor, the kind of the input signal (Signal1 or 2/Analog or Digital) is

displayed for a few seconds on the right top corner of the screen.

•

Adjust brightness of the screen depending on the brightness of your environment. Too dark or

toobright of a screen can cause eyestrain.

•

Be sure to take adequate rests. A 10-minute rest period each hour is suggested.

When using the software, ColorNavigator CE, connect the upstream port of the

monitor to the downstream port of the USB compliant PC or another hub with

the USB cable.

After connecting the USB cable, the USB function can be set up automatically. For further details

about the"ColorNavigator CE", refer to the readme.txt in the CD-ROM.

USB Cable

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 51 52

No comments

Eizo CE210W User Manual Page 15