Eizo FLEXSCAN L671 - Specifications download pdf (Page 24)

24 4. ADJUSTMENT

4. Set the Contrast of the screen.

Adjust the “Contrast”

This controls the contrast of the screen. The contrast is changed by adjusting the

gain level of the input signal to obtain the maximum contrast.

Select the “Contrast/Brightness” in the screen menu..

[Auto]

Push the Auto adjustment button on the front panel while displaying the “Contrast/

Brightness” menu to automatically adjust the contrast. The screen blanks for a

moment, and adjusts the contrast to the maximum contrast level of the current input

signal.

[Manual]

Adjust the contrast level by using the right and left buttons until the percentage

color is on the border of white and yellow or fully yellow. ( In the case of the

percentage color switching from white to yellow, please note that this is not an error

but actually the most optimum adjustment point.)

5. Set the Brightness of the Screen.

Adjust the “Brightness”

This controls the brightness of the screen. The brightness of the entire screen is

controlled by changing the brightness of the backlight.

Select “Contrast/Brightness” in the screen menu and adjust by using the up and

down buttons.

• Directly pressing the control buttons also adjusts the contrast and brightness. Press

the “Enter” button to save and exit the settings after the adjustment.

Too High Too LowOK

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 56 57

No comments

Eizo FLEXSCAN L671 - Specifications Page 24