Important Please read PRECAUTIONS and this User’s Manual carefully to familiarize yourself with safe and effective usage procedures. Please reta
1.4 Instructions for Handling Components Susceptible to Electrostatic Shocks Most of the assemblies within the LCD monitor Raptor SQ2801 contain com
2 General Installation Preparation for installing the LCD monitor includes following steps: • Removal of all packaging materials • Checking of co
2.2 Installing the Monitor The Raptor SQ2801 is currently offered in two versions - desktop version and chassis version. Both these version are disc
2.2.1 Raptor SQ2801 Dimensions (Chassis version) Fig. 3: Raptor SQ2801 Dimensions (Chassis version); Front View 2 General Installation 13
Fig. 4: Raptor SQ2801 Dimensions (Chassis version); Rear View 14 2 General Installation
Fig. 5: Raptor SQ2801 Dimensions (Chassis version); Side View 2 General Installation 15
2.2.2 Raptor SQ2801 Dimensions (Desktop version) Fig. 6: Raptor SQ2801 (Desktop Version); Front View 16 2 General Installation
Fig. 7: Raptor SQ2801 Dimensions (Desktop version); Rear View 2 General Installation 17
Fig. 8: Raptor SQ2801 Dimensions (Desktop); Side View 18 2 General Installation
2.2.3 Raptor SQ2801 Dimensions (Panel mount version) Fig. 9: Raptor SQ2801 Dimensions (Panel mount); Front View 2 General Installation 19
Fig. 10: Raptor SQ2801 Dimensions (Panel mount); Side View 20 2 General Installation
Fig. 11: Raptor SQ2801 Dimensions (Panel mount); Back View 2 General Installation 21
2.3 Interfaces and Connector Assignment The monitor has been tested and pre-adjusted at the factory. For system installation, connect the unit to th
2.3.1 Analog RGB – Interface The analog RGB input may be used for Sony DDM compatible configurations. However, the Raptor SQ2801 panel can also han
2.3.2 DVI-1 / DVI-2 Interface The digital video inputs use the standard dual-link DVI interface. Dual-link DVI is necessary to support the high data
2.3.3 RS232-1 Interface This RS232 interface is used for communication with the host machine (workstation). Three different protocols are available
2.3.5 RS422 Interface The RS422 interface is used for communication with a workstation. Three different protocols are available which are described i
2 General Installation 27 2.3.6 External OSD-Keyboard Interface This connector is for an external passive keyboard which has exactly same function
3 Operation and Adjustment The manual operation and adjustment of the monitor is facilitated by buttons that are integrated on the front of the unit.
3.2 OSD-Menu / Quick-OSD-Menu In addition to detailed adjustments in the OSD-Menu, there is another option available for adjusting frequently used
Copyright© 2007 Tech Source, Inc. Copyright© 2007 EIZO NANAO CORPORATION No part of this manual may be reproduced, stored in
3.2.2 OSD-Menu The OSD (On Screen Display) is a menu system which is displayed on the screen. All monitor settings and adjustments are done by oper
Function Description RGB DVIFrequency Frequency adjustment, see section 3.3.1 page 41 Setting range: depends on input timing / resolution X Scali
3.2.2.2 OSD-Menu (Advanced) Fig. 17: OSD-Menu (advanced) Function Description RGB DVISharpness Sharpness adjustment of the picture; choose from
3.2.2.3 OSD-Menu - Options 1 Fig. 18: OSD-Menu - Options 1 Function Description RGB DVIOSD Choose among nine predefined OSD positions X X OSD
3.2.2.4 OSD-Menu - Options 2 Fig. 19: OSD-Menu - Options 2 Function Description RGB DVIDPMS Display power management system If DPMS is active
Function Description RGB DVIDDM contrast DDM control function assignment to DDM protocol 0xA1 Valid functions: backlight, brightness, contrast, di
3.2.2.5 OSD-Menu - Options 3 Fig. 20: OSD-Menu - Options 3 Function Description RGB DVI RGB-noise suppression This function suppresses interfe
3.2.2.6 OSD-Menu – Utilities Fig. 21: OSD-Menu – Utilities Function Description RGB DVILanguage Select language of OSD Menu Setting range: Eng
3.2.2.7 OSD-Menu - Utilities / Installation RGB-Mode Fig. 22: OSD-Menu - Utilities / Installation RGB-Mode Function Description RGB DVIOptions
3.2.2.8 OSD-Menu - Infos 1 Fig. 23: OSD-Menu – Infos 1 Function Description RGB DVIFW Shows the firmware version of the controller board X X
Contents 1 Overview... 6
3.2.2.9 OSD-Menu - Infos 2 Fig. 24: OSD-Menu – Infos 2 Function Description RGB DVI Vdd-fuse Shows status of main power fuse X X Backlight inv
3.3 Adjustment Analog Signal Source (DDM) There is no strict standardization for the signals coming from analog signal sources. Certain adjustments
With bad frequency adjustment from left to right, parts of the picture appear blurred. Each alteration of the frequency increases or decreases the nu
Serial Communication 4 Serial Communication The Raptor SQ2801 features as described in Chapter 3 can be controlled via an application on the host wo
4.1 Standard Protocol 4.1 Standard Protocol The standard protocol supports all adjustments and control of the monitor. This protocol uses two kinds
4.1.1 Data Packet Structure “Operation” Byte No 0 1 2 3 4 5 6 7 8 9 10 Data 0xBE 0xEF 0x03 0x19 0x00 CRC-L CRC-HO-Type Code-L Code-H0x00 Byte No 11
4.1.2 Data Packet Structure “Keyboard Simulation” 4.1.2 Data Packet Structure “Keyboard Simulation” Byte No. Byte No. 0 0 1 1 2 2 3 3 4 4 5 5 6 6
4.1.3 Calculation of CRC - Check Sum For CRC check sum calculation set 0x00 for CRC-L and CRC-H. Check sum is calculated according to a reference t
0x22, 0xE2, 0xE3, 0x23, 0xE1, 0x21, 0x20, 0xE0, 0xA0, 0x60, 0x61, 0xA1, 0x63, 0xA3, 0xA2, 0x62, 0x66, 0xA6, 0xA7, 0x67, 0xA5, 0x65, 0x64,
4.2 Simplified Protocol The simplified protocol uses a data packet structure similar to the standard protocol, however with reduced functional range
5 Technical Data ... 54 5.1 Display
CMDCMD Code Command Comment 0x01 Status Reply of system status Host Monitor Byte 03: L-Len = 0x01 Byte 04: H-Len = 0x00 Monitor
Code Command Comment 0x02 Source Switch This command enables the host to switch signal source. Host Monitor Byte 03: L-Len = 0x01 Byt
Code Command Comment 0x04 Brightness This command is used to adjust brightness (black level). Host Monitor Byte 03: L-Len = 0x02 Byte
List of implemented commands: Code Command Comment 0xA0 Operator Brightness This command is used to set Backlight brightness. 0xA1 Operator Contr
5 Technical Data 5.1 Display Module Type Color active TFT-LCD Diagonal 28.05" Display area (WxH) 503.808 x 503.808 mm² Resolution 2048 x 2048 Pi
5.3 Operating Conditions Operating temperature 0 to +40 °C Storage temperature -25 to +60 °C Humidity max. 95 % (no condensation) 5.4 Protection
5.7 Standard ATC-Timing H-Frequency 126.84 KHz Pixel clock 357 MHz H-Total 2816 pixel H-Visible 2048 pixel V-Frequency 60 Hz V-Total 2114 lines V-Vis
5.10 EU – Declaration of Conformity on EMC Product LCD-Monitor Raptor SQ2801 Test guidelines EG-guide lines No 2004/108/EC No 2006/95/EC Harm
6 Part Numbers and Field Replaceable Units (FRUs) 6.1 TSI ATC Visualization Kit The Raptor SQ2801 is part of the Tech Source ATC Visualization kit
1st Edition-October, 2007 03V22230A1 (U.M-SQ2801-EN)
1 Overview The TFT Monitor Raptor SQ2801 was developed to meet the very demanding requirements in the Air Traffic Management where system availabilit
1.1 Layout of this Manual This manual was created to assist system integrators and operators during installation and operation of the LCD TFT Monit
1.2 Warnings and Safety Notes For information about warnings and safety notes, refer to PRECATUIONS supplied with this manual. 8 1 Overview
1.3 Packaging NOTE To avoid permanent damage, great care should be taken to ensure that the monitor is adequately packed and transported in the corr
Comments to this Manuals