Eizo S2031W User Manual download pdf (Page 14)

Chapter 2 Settings and Adjustments

2-2 Screen Adjustment

Digital Input

When digital signals are input, images are displayed correctly based on the

preset data of the monitor. No screen Adjustment is required.

Analog Input

The monitor screen adjustment is used to suppress ﬂickering of the screen or

adjust screen position and screen size correctly according to the PC to be used.

To use the monitor comfortably, adjust the screen when the monitor is set up for

the ﬁrst time or when the settings of the PC in use are updated.

The auto-adjustment function works in the following cases:

• When a signal is input into the monitor for the ﬁrst time

• When a signal is input into the monitor for the ﬁrst time after the

resolution or refresh rate of input signals is changed

[Adjustment Procedure]

Automatic Adjustment

To adjust screen automatically [Screen]

(1) Choose <Screen> from the <Auto Adjustment> menu, and press

(2) Choose <Execute> with or , and press .

Flickering, screen position, and screen size are corrected by the auto-

adjustment function.

If satisfactory adjustment cannot be obtained with the auto-

adjustment function, perform the adjustment following the

procedure below. When the screen is displayed correctly, go to step

4 “Range Adjustment”.

Advanced Adjustment

Run the Screen Adjustment Program.

Load the EIZO LCD Utility Disk on the PC, and start the Screen

Adjustment Program compatible with the PC in use.

After the program starts up, perform the adjustment in step 3 following the

instructions of the program.

Attention

• Wait 30 minutes or more from

monitor power on before starting

adjustments.

NOTE

• For how to start the Screen

Adjustment Program, refer to

“Readme.txt” or the “read me” ﬁle.

When you are using a Windows PC,

you can run the program directly from

the start menu of the disk.

• If no adjustment program is available

for your PC, display a checkerboard

pattern on the screen (see below) and

go to the following steps.

NOTE

• Use “Screen Adjustment Program” on

the supplied EIZO LCD Utility Disk.

Attention

• This function works correctly when

an image is fully displayed over the

Windows or Macintosh display area.

It does not work properly when an

image is displayed only on a part of

the screen (DOS prompt window, for

example) or when a black background

(wallpaper, etc.) is in use.

• This function does not work correctly

with some graphics boards.

• “Auto in Progress” appears on the

screen during auto adjustment.

Attention

• Auto-adjustment function does

not work for the images under the

resolution of 800 to 600 (SVGA).

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 46 47

Comments to this Manuals

No comments

Eizo S2031W User Manual Page 14

Comments to this Manuals

Related products and manuals for TVs & monitors Eizo S2031W