Eizo T57S User Manual download pdf (Page 23)

5 OTHER SETTINGS

Input Priority

This unique feature of the ScreenManager is for those users who utilize

two PCs. It allows the user to set the priority on the PC of choice.

The monitor automatically detects the selected 'Input Priority' setting

every time the power is turned ON (see note). Once the priority is set,

whenever a signal is detected at that connection, the monitor will convert

to that signal and display the data being sent.

There are three settings available: D-Sub, BNC or Manual. Since the

monitor comes with a standard D-Sub cable, the default priority setting

is set to D-Sub.

If only a single PC is connected and the standard bundled cable is used,

no special setting is required.

How to use

Use this function to select which of two connected PCs controls the

monitor. The following table indicates the available selections. For

additional information, refer to "Getting the Most from your Monitor"

on page 27.

Priority setting Performance

D-Sub The monitor automatically detects and displays

signals received from the D-Sub or BNC input.

If signals from both inputs are present, the monitor

displays the D-Sub signal.

BNC The monitor automatically detects and displays input

signals received at the BNC or D-Sub input.

If signals from both inputs are present, the monitor

displays the BNC signal.

Manual The monitor does not detect signals automatically.

Select the active input by pressing the BNC/D-Sub

selection button on the monitor's front panel.

• The ScreenManager priority setting can be overridden at any time by

using the BNC/D-Sub selection button on the front panel. Priority

selection will be restored when the PC or monitor is switched ON

again.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 47 48

No comments

Eizo T57S User Manual Page 23