Eizo FX2431 User Manual download pdf (Page 22)

Chapter 3 Settings and Adjustments

3-1 Screen Adjustment

PC2 Input

(Only for Analog Input Signal)

The monitor screen adjustment is used to suppress ickering of the screen or

adjust screen position and screen size correctly according to the PC to be used.

The Auto Screen Adjust function works in the following cases:

• Whenasignalisinputintothemonitorforthersttime

• When the resolution or Vertical/Horizontal Frequency not displayed

before is set

If the screen is not displayed correctly even after performing the Auto Screen

Adjust function, perform the screen adjustments according to the procedures on

the following pages to use the monitor comfortably.

[Adjustment Procedure]

Perform the auto screen adjustment.

● Toadjustickering,screenposition,andscreensize

automatically [Auto Screen Adjust]

(1) Choose [Monitor Settings] in the Setting menu and press

(2) Choose [Advanced Settings] in the [Monitor Settings] menu and

press .

(3) Choose [Auto Screen Adjust] in the [Advanced Settings] menu and

press .

(4) Choose “Yes” with

, and then press .

Flickering, screen position, and screen size are corrected by the Auto

Screen Adjust function.

If the screen is not displayed correctly even after adjusting in

step 1 above, perform the adjustments according to the

procedures on the following pages. When the screen is

displayed correctly, go to step 5 “To adjust color gradation

automatically [Auto Range Adjust]”.

Prepare the display pattern for the analog display adjustment.

■ For Windows PC

Load the “EIZO LCD Utility Disk” to your PC, and then open the

screen adjustment pattern les.

■ For other than Windows PC

Download the “Screen adjustment pattern les” from our site: http://

www.eizo.com

Attention

• Wait 30 minutes or more from

monitor power on before starting

adjustments.

• The Auto Screen Adjust function does

not work for the input signal of low

resolution, such as VGA, etc.

Attention

• Wait 30 minutes or more from

monitor power on before starting

adjustments.

• The Auto Screen Adjust function does

not work for the input signal of low

resolution, such as VGA, etc.

NOTE

• When digital signal is input from PC,

images are displayed correctly based

on the preset data of the monitor. No

screen adjustment is required.

NOTE

• When digital signal is input from PC,

images are displayed correctly based

on the preset data of the monitor. No

screen adjustment is required.

Attention

• This function works correctly when

an image is fully displayed over the

Windows or Macintosh display area.

It does not work properly when an

image is displayed only on a part of

the screen (command prompt window,

for example) or when a black

background (wallpaper, etc.) is in use.

• This function does not work correctly

with some graphics boards.

Attention

• This function works correctly when

an image is fully displayed over the

Windows or Macintosh display area.

It does not work properly when an

image is displayed only on a part of

the screen (command prompt window,

for example) or when a black

background (wallpaper, etc.) is in use.

• This function does not work correctly

with some graphics boards.

NOTE

• When the “Select the input signal

resolution.” message appears, select

the resolution that has been set on the

PC and press .

NOTE

• When the “Select the input signal

resolution.” message appears, select

the resolution that has been set on the

PC and press .

NOTE

• For how to open and contents of the

screen adjustment pattern les, refer

to “Readme.txt”.

NOTE

• For how to open and contents of the

screen adjustment pattern les, refer

to “Readme.txt”.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 56 57

Comments to this Manuals

No comments

Eizo FX2431 User Manual Page 22

Comments to this Manuals

Related products and manuals for LED displays Eizo FX2431