Eizo FX2431 User Manual download pdf (Page 45)

Chapter 5 Reference

5-1 Attaching an Arm

The stand can be removed and replaced with an arm (or another stand) to be

attached to the monitor.

Lay the LCD monitor on a soft cloth spread over on a stable

surface with the panel surface facing down.

Remove the stand. (Prepare a screwdriver.)

Unscrew the four screws securing the unit and the stand with the

screwdriver.

Attach the monitor to the arm or stand.

Secure the monitor to the arm or stand using the screws specied in the

user’s manual of the arm or stand.

arm

Attention

• When using an arm or stand, conrm

the following in advance and select

one conforming to the VESA

standard.

– Clearance between the screw holes:

100 mm × 100 mm

– Thickness of plate: 2.6 mm

– Strong enough to support weight of

the monitor unit (except the stand)

and attachments such as cables.

Use M4 × 12 mm screws supplied

with this monitor.

• When attaching an arm or stand,

follow the instructions of their user’s

manual.

• When using an arm or stand, attach it

to meet the following tilt angles of the

monitor.

– Up 45 degrees, down 45 degrees

• Connect the cables after attaching an

arm.