Eizo FLEXSCAN L771 - Specifications download pdf (Page 33)

7. ATTACHING AN ARN STAND 33

ENGLISH

7. ATTACHING AN ARM STAND

The LCD monitor can be used with an arm stand by removing the tilt stand and

attaching the arm stand to the LCD monitor.

NOTE

´ Use an arm stand that satisfies the followings.

• When using the LCD monitor with an arm stand,the

arm stand must be VESA approved :

* Use an arm stand with a 100 mm x 100 mm hole

spacing on the arm mounting pad.

* Use an arm stand that is able to support an

object weighing 13.5 kg.

´ TÜV/GS approved arm stand.

´ Use an arm stand with sufficient stability

(mechanical firmness) to support the weight of the

monitor.

´ Use an arm stand remaining that position where it is

manually moved.

´ Use an arm stand with the ability to tilt the monitor

forward and backward.

´ Use an arm stand less than or equal to 500 mm in

relation to the desk surface when the arm stand is in

its lowest position.

´ Please connect cables after attaching an arm stand.

Setup Procedure

1. Lay the LCD monitor down as shown below. Do not scratch the panel.

(Example)

500 mm or

less

M4 x 12 mm x 4

100 mm

Soft Cloth or

Cushion

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 52 53

No comments

Eizo FLEXSCAN L771 - Specifications Page 33